Aplicación de láser a recubrimientos de proyección térmica base níquel, sobre acero al carbono
Resumen
En este trabajo, se presentan los resultados provenientes de la generación de recubrimientos base Níquel mediante proyección térmica por flama, seguidos de la aplicación de radiación láser, en diferentes condiciones, sobre un acero de bajo carbono. Los revestimientos logrados fueron caracterizados mediante microscopía electrónica de barrido y microanálisis, ensayos de microdureza, rugosidad y de polarización lineal, con el fin de caracterizar el efecto de la aplicación de la radiación láser en la resistencia a la corrosión de los recubrimientos previamente elaborados por proyección térmica, en un medio salino. Con la aplicación de la radiación láser se consiguió una mejora de la resistencia a la corrosión, asociada, principalmente a la disminución de la porosidad del recubrimiento generado mediante Proyección Térmica.
Descargas
Citas
Al-Sayed S., Hussein , A. Nofal A. , Hassab S. , Elgazzar H.. (2017). Characterization of a Laser Surface-Treated Martensitic Stainless Steel. Materials 10, 595; doi:10.3390/ma10060595
Bergant Z.;Grum J. (2009). Quality Improvement of Flame Sprayed, Heat Treated, and Remelted NiCrBSi Coatings. JTTEE5 18:380–391. DOI: 10.1007/s11666-009-9304-7
Cuao Moreu, C.A.; Maldonado Cortés, D.; Lara Banda, M.d.R.; García Sánchez, E.O.; Zambrano Robledo, P.; Hernández Rodríguez, M.A.L(2021).. Surface, Chemical and Tribological Characterization of an ASTM F-1537 Cobalt Alloy Modified through an Ns-Pulse Laser. Metals, 11, 1719. https://doi.org/10.3390/met11111719
Fenineche N.; Cherigui M.. (2008). Thermal Spraying Coatings Assisted by Laser Treatment. AIP Conference Proceedings 1047, 95–98 . Laser and Plasma Applications inMaterials Science, edited by E.-H. Amara, S. Boudjemai, and D. Doumaz. https://doi.org/10.1063/1.2999976
Glanc A. et al (2018). Microstructure and tribological behavior of HVOF sprayed and laser treated CoCrTaAlCSiY coatings. IOP Conf. Ser.: Mater. Sci. Eng. 461 01202.
Gong N. et al (2023) Laser-treatment-induced surface integrity modifications of stainless steel. Mater. Res. Express 10 034002 DOI 10.1088/2053-1591/acbe93
Gong G., Ye,J. Chi Y, Zhao Z., Wang Z., Xia G., Du X., Tian H.,, Yu H., Chen C. (2021). Research status of laser additive manufacturing for metal: a review. Journal of Materials Research and Technology, 15, 855-884. https://doi.org/10.1016/j.jmrt.2021.08.050.
González R, Cadenas M. Fernández R, Cortizo J.R,. Rodríguez E. (2007) . Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser. Wear. 262, 3-4. 301-307. https://doi.org/10.1016/j.wear.2006.05.009.
Gu D., Meiners W., Wissenbach K, Poprawe R. (2012.) Laser additive manufacturing of metallic components: materials, processes and mechanisms, International Materials Reviews, 57:3, 133-164, DOI: 10.1179/1743280411Y.0000000014
Habib K, Cano D., Heredia J. et. al. (2022). Effects of thermal spraying technique on the remelting behavior of NiCrBSi coatings. Surface and Coatings Technology, 444, 128669. https://doi.org/10.1016/j.surfcoat.2022.128669
Janicki, D. (2017). Fabrication of high chromium white iron surface layers on ductile cast iron substrate by laser surface alloying. Stroj.Vestn. J. Mech. E, 63, 705–714.
Janicki, D. (2017) . Laser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particles. Opt. Laser Technol., 94, 6–14. [CrossRef]
Jeyaprakash, N.; Yang, C.-H.; Duraiselvam, M.; Prabu, G. (2019) Microstructure and tribological evolution during laser alloying WC—12% Co and Cr3C2—25% NiCr powders on nodular iron surface. Results Phys. 12, 1610–1620. [CrossRef]
Jeyaprakash N, Yang C, Kumar D. (2020). Laser Surface Modification of Materials. DOI: http://dx.doi.org/10.5772/intechopen.94439.
Karimi M, Salimijazi H, Golozar M. (2016) Effects of remelting processes on porosity of NiCrBSi flame sprayed coatings, Surface Engineering, 32:3, 238-243, DOI: 10.1179/1743294415Y.0000000107
A. Kotarska,. (2021). The Laser Alloying Process of Ductile Cast Iron Surface with Titanium. Metals 11, 282. https://doi.org/10.3390/met11020282
Lisiecki, A.; ´Slizak, D.; Kukofka, A. (2019). Laser cladding of Co-based metallic powder at cryogenic conditions. J. Achiev. Mater. Manuf. Eng., 95, 20–31. [CrossRef]
Olakanmi, E.O., Doyoyo, M. Laser-Assisted Cold-Sprayed Corrosion- and Wear-Resistant Coatings: A Review. (2014). J Therm Spray Tech 23, 765–785. https://doi.org/10.1007/s11666-014-0098-x
Panziera, R.C., de Oliveira, A.C.C., Pereira, M. et al. (2020). Study of the effects of the laser remelting process on the microstructure and properties of the WC–10Co–4Cr coating sprayed by HVOF. J Braz. Soc. Mech. Sci. Eng. 42, 119. https://doi.org/10.1007/s40430-020-2201-1
Poloczek, T.; Kotarska, A. (2020). Effect of laser cladding parameters on structure properties of cobalt-based coatings. IOP Conf. Ser.Mater. Sci. Eng, 916, 012085. [CrossRef]
Rezayat, M.; Aboutorabi Sani, A.; Talafi Noghani, M.; Saghafi Yazdi, M.; Taheri, M.; Moghanian, A.; Mohammadi, M.A.; Moradi, M.; Mateo García, A.M.; Besharatloo, H.(2023). Effect of Lateral Laser-Cladding Process on the Corrosion Performance of Inconel 625. Metals, 13, 367. https://doi.org/10.3390/met1302036
Singh, S.; Berndt C., ; Raman S.,.; Singh, H.,(2023). Applications and Developments of Thermal Spray Coatings for the Iron and Steel Industry. Materials,, 16, 516.https://doi.org/10.3390/ma16020516
Suutala J., Tuominen T, Vuoristo V. (2006). Laser-assisted spraying and laser treatment of thermally sprayed coatings. Surface and Coatings Technology, 201, 5. 1981-1987. https://doi.org/10.1016/j.surfcoat.2006.04.042
Yang Z , Liang W , Miao Q., Ding Z., Huang B.. (2022). Hot corrosion behaviors of as sprayed and laser remelted YSZ thermal barrier coatings at 950°C. Materia 27, 3. DOI: https://doi.org/10.1590/1517-7076-RMAT-2022-0052
Zhang S, Jiang J, Zou X, Liu N, Wang H, Yang L, Zhou H and Liang C (2022), Progress of laser surface treatment on magnesium alloy. Front.Chem.10:999630.
doi: 10.3389/fchem.2022.999630.
Derechos de autor 2023 Raúl Valdez Navarro, Rafael González Parra, Helgi Waage Delgadillo, Alba Covelo Villar, Miguel Ángel Hernández Gallegos, Arturo Barba Pingarron
Esta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial-SinObrasDerivadas 4.0.
