Concreto con caucho reciclado para rodamiento: resistencia a compresión

Andrea Meneses Valencia; Humberto Iván Navarro Gómez; Cutberto Rodríguez Álvarez; Jesus Emmanuel Ceron Carballo

doi:10.29057/icbi.v14iespecial3.17945

Autores/as

Andrea Meneses Valencia Universidad Autónoma del Estado de Hidalgo https://orcid.org/0009-0007-0816-8851
Humberto Iván Navarro Gómez Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0003-2338-4863
Cutberto Rodríguez Álvarez Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0002-9225-8695
Jesus Emmanuel Ceron Carballo Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0003-2809-3387

DOI:

https://doi.org/10.29057/icbi.v14iespecial3.17945

Palabras clave:

caucho reciclado, concreto, resistencia a la compresión, pavimentos, economía circular

Resumen

El estudio evaluó comparativamente la resistencia a la compresión de un concreto patrón y de una mezcla identificada en los registros disponibles con 5 % en masa de caucho reciclado como sustitución parcial del agregado fino, con aplicación potencial en superficies de rodamiento. Los especímenes se evaluaron a 7, 14 y 28 días. Los valores reportados para el concreto patrón fueron 159, 238 y 266 kgf/cm², respectivamente, mientras que la mezcla con 5% de caucho registró 165, 244 y 271 kgf/cm². Las diferencias descriptivas fueron de +3.77%, +2.52% y durabilidad.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

Agrawal, D., Amin, M. N., Ahmad, J., Alabduljabbar, H., Khan, K. A., Mosavi, A., & Aslam, F. (2023). Experimental effect of pre-treatment of rubber fibers on the performance of concrete. [*Journal of Materials Research and Technology*](https://www.sciencedirect.com/journal/journal-of-materials-research-and-technology)*, 23, 791-807* [https://doi.org/10.1016/j.jmrt.2023.01.027](https://doi.org/10.1016/j.jmrt.2023.01.027)

Ahmad, J. (2022). Overview of concrete performance made with waste rubber tires: A step toward sustainable concrete. *Materials, 15*(16), 5662. [https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9410276/](https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9410276/)

Albano, C., Camacho, N., Reyes, J., Feliu, J. L., & Hernández, M. (2005). Influence of scrap rubber addition to Portland concrete composites: Destructive and non-destructive testing. *Composite Structures, 71*, 439–446. [https://doi.org/10.1016/j.compstruct.2005.09.037](https://doi.org/10.1016/j.compstruct.2005.09.037)

American Association of State Highway and Transportation Officials. (2024). *AASHTO T 27-23: Sieve analysis of fine and coarse aggregates*. AASHTO.

Assaggaf, R. A., Ali, M. R., Al-Dulaijan, S. U., & Maslehuddin, M. (2021). Properties of concrete with untreated and treated crumb rubber – A review. *Journal of Materials Research and Technology, 11*, 1734–1755. [https://doi.org/10.1016/j.jmrt.2021.02.019](https://doi.org/10.1016/j.jmrt.2021.02.019)

ASTM. (2018a). *ASTM C39: Standard test method for compressive strength of cylindrical concrete specimens*. American Society for Testing and Materials.

ASTM. (2018b). *ASTM C136/C136M: Standard test method for sieve analysis of fine and coarse aggregates*. American Society for Testing and Materials.

ASTM International. (2019). ASTM D5603-19: Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber. ASTM International.

El-Zohairy, A., Sanchez, M., Abediniangerabi, B., & Moler, P. (2023). Performance of rubberized concrete and the effect of temperature and stainless-steel fibers. *Buildings, 13*(2), 280. [https://doi.org/10.3390/buildings13020280](https://doi.org/10.3390/buildings13020280)

Fadiel, A. A. M., Mohammed, N. S., Abu-Lebdeh, T., Munteanu, I. S., Niculae, E., & Petrescu, F. I. T. (2023). A comprehensive evaluation of the mechanical properties of rubberized concrete. *Journal of Composites Science, 7*(3), 129. [https://doi.org/10.3390/jcs7030129](https://doi.org/10.3390/jcs7030129)

Farfán, M., & Leonardo, E. (2018). Recycled rubber in the compressive strength and bending of modified concrete with plasticizing admixture. *Revista de la Construcción, 17*(3), 515–524. [https://doi.org/10.4067/S0718-50732018000300241](https://doi.org/10.4067/S0718-50732018000300241)

Gandel, R., Jerabek, J., & Varak, J. (2024). The influence of the use of recycled rubber in concrete on its selected properties. *E3S Web of Conferences, 550*, 01041. [https://doi.org/10.1051/e3sconf/202455001041](https://doi.org/10.1051/e3sconf/202455001041)

Ganjian, E., Khorami, M., & Maghsoudi, A. A. (2009). Scrap-tire-rubber replacement for aggregate and filler in concrete. *Construction and Building Materials, 23*(5), 1828–1836. [https://doi.org/10.1016/j.conbuildmat.2008.09.020](https://doi.org/10.1016/j.conbuildmat.2008.09.020)

Guo, S., Dai, Q., Si, R., Sun, X., & Lu, C. (2017). Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire. *Journal of Cleaner Production, 148*, 681–689. [https://doi.org/10.1016/j.jclepro.2017.02.046](https://doi.org/10.1016/j.jclepro.2017.02.046)

Gupta, T., & Kua, H. W. (2017). Sustainability assessment of concrete and its ingredients: A comprehensive review. *Journal of Cleaner Production, 165*, 897–910.

Gupta, T., Kua, H. W., & Koh, H. B. (2018). Application of tire waste in concrete: A systematic review. *Construction and Building Materials, 168*, 77–91.

He, S., Jiang, Z., Chen, H., Chen, Z., Ding, J., Deng, H., & Mosallam, A. S. (2023). Mechanical properties, durability, and structural applications of rubber concrete: A state-of-the-art-review. *Sustainability, 15*(11), 8541. [https://doi.org/10.3390/su15118541](https://doi.org/10.3390/su15118541)

Helmy, S. H., Tahwia, A. M., Mahdy, M. G., Elrahman, M. A., Abed, M. A., & Youssf, O. (2023). The use of recycled tire rubber, crushed glass, and crushed clay brick in lightweight concrete production: A review. *Sustainability, 15*(13), 10060. [https://doi.org/10.3390/su151310060](https://doi.org/10.3390/su151310060)

Jiang, Z. (2021). Surface treatment of rubberized waste reinforced concrete. *Frontiers in Built Environment, 7*, 685067. [https://doi.org/10.3389/fbuil.2021.685067](https://doi.org/10.3389/fbuil.2021.685067)

Keleş, Ö. F., Bayrak, O. Ü., & Bayata, H. F. (2024). Experimental investigation on the mechanical properties of sustainable roller-compacted concrete pavement (RCCP) containing waste rubbers as alternative aggregates. *Construction and Building Materials, 424*, 135930. [https://doi.org/10.1016/j.conbuildmat.2024.135930](https://doi.org/10.1016/j.conbuildmat.2024.135930)

Kilani, A. J., Ikotun, B. D., & Abdulwahab, R. (2025). Effect of crumb rubber on concrete's and mortar's structural properties: A review. *Iranian Journal of Science and Technology, Transactions of Civil Engineering, 49*, 1037–1067. [https://doi.org/10.1007/s40996-024-01647-8](https://doi.org/10.1007/s40996-024-01647-8).

Liu, J., Li, J., Xu, Y., & Ma, S. (2024). Mechanical properties of cement concrete with waste rubber powder. *Applied Sciences, 14*(15), 6636. [https://doi.org/10.3390/app14156636](https://doi.org/10.3390/app14156636)

Malluru, S., Islam, S. M. I., Saidi, A., Baditha, A. K., Chiu, G., & Mehta, Y. (2025). A state-of-the-practice review on the challenges of asphalt binder and a roadmap towards sustainable alternatives—A call to action. *Materials, 18*(10), 2312. [https://doi.org/10.3390/ma18102312](https://doi.org/10.3390/ma18102312)

Moolchandani, K., & Sharma, A. (2025). State-of-the-art review on the influence of crumb rubber on the strength, durability, and morphological properties of concrete. *Science and Engineering of Composite Materials, 32*(1), 20250060. [https://doi.org/10.1515/secm-2025-0060](https://doi.org/10.1515/secm-2025-0060)

Osman, A., Hassan, A., & Omar, S. (2024). Resistance of rubberized asphalt mixture to aging and moisture damage. *IIUM Engineering Journal, 25*(2), 155–168. [https://doi.org/10.31436/iiumej.v25i2.3040](https://doi.org/10.31436/iiumej.v25i2.3040)

Peláez Arroyave, G. J., Velásquez Restrepo, S. M., & Giraldo Vásquez, D. H. (2017). Applications of recycled rubber: A literature review. *Ciencia e Ingeniería Neogranadina, 27*(2), 27–50. [https://doi.org/10.18359/rcin.2143](https://doi.org/10.18359/rcin.2143)

Pelisser, F., Zavarise, N., Longo, T. A., & Bernardin, A. M. (2011). Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition. *Journal of Cleaner Production, 19*(6–7), 757–763. [https://doi.org/10.1016/j.jclepro.2010.11.014](https://doi.org/10.1016/j.jclepro.2010.11.014)

Roychand, R. (2021). Practical rubber pre-treatment approach for concrete use—An experimental study. *Journal of Composites Science, 5*(6), 143. [https://doi.org/10.3390/jcs5060143](https://doi.org/10.3390/jcs5060143)

Segre, N., & Joekes, I. (2000). Use of tire rubber particles as addition to cement paste. *Cement and Concrete Research, 30*(9), 1421–1425. [https://doi.org/10.1016/S0008-8846(00)00373-2](https://doi.org/10.1016/S0008-8846%2800%2900373-2)

Shahzad, K., & Zhao, Z. (2022). Experimental study of NaOH pretreated crumb rubber as a substitute of fine aggregate in concrete. *Construction and Building Materials, 358*, 129448. [https://doi.org/10.1016/j.conbuildmat.2022.129448](https://doi.org/10.1016/j.conbuildmat.2022.129448)

Sherbini, A. S., & Abou El-Mal, H. S. S. (2025). Assessment of rubberized concrete as a promising green building material. *Journal of Umm Al-Qura University for Engineering and Architecture, 16*, 1417–1425. [https://doi.org/10.1007/s43995-025-00176-3](https://doi.org/10.1007/s43995-025-00176-3)

Surehali, S., Singh, A., & Biligiri, K. P. (2023). A state-of-the-art review on recycling rubber in concrete: Sustainability aspects, specialty mixtures, and treatment methods. *Developments in the Built Environment, 14*, 100171. [https://doi.org/10.1016/j.dibe.2023.100171](https://doi.org/10.1016/j.dibe.2023.100171)

Thomas, B. S., Gupta, R. C., & Panicker, V. J. (2016). Recycling of waste tire rubber as aggregate in concrete: Durability-related performance. *Journal of Cleaner Production, 112*, part 1,504–513. [https://doi.org/10.1016/j.jclepro.2015.08.046](https://doi.org/10.1016/j.jclepro.2015.08.046)

Wu, L., Li, R., Zhu, Z., Pan, T., Aydin, B. B., & Zhou, Y. (2025). Effects of elevated temperature on rubber concrete: Fracture properties and mechanism analysis. *Construction and Building Materials, 466*, Article 140263. [https://doi.org/10.1016/j.conbuildmat.2025.140263](https://doi.org/10.1016/j.conbuildmat.2025.140263)

Zheng, X., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2022). Material recovery and recycling of waste tyres—A review. *Cleaner Materials, 5*, 100115. [https://doi.org/10.1016/j.clema.2022.100115](https://doi.org/10.1016/j.clema.2022.100115)