Recubrimientos de Al2O3/TiO2 depositados en sustratos de acero inoxidable y galvanizado para aplicaciones fotocatalíticas.

Keywords: Photocatalyst, Al2O3, TiO2, coating, adhesion

Abstract

The design of a photocatalyst with physicochemical properties such as to ensure high catalysis is more valuable if it can be used repeatedly without appreciable loss of its efficiency when deposited on metallic substrates that give it high mechanical strength for a higher number of operating cycles. In this work, soles of Al2O3/TiO2 in an Al/Ti ratio of 1.5 were deposited on 304 stainless steel and galvanized steel substrates by the dip-coating method. By infrared spectroscopy were identified the Al-O bond bands in 500-750 cm-1 and Ti-O bond bands in 493-639 cm-1 in the coatings by UV-Vis spectroscopy coating absorb a low intensity of visible radiation (420 to 650 nm) compared to the absorption maximum in the UV spectrum (220-230 nm). The coatings deposited on galvanized steel showed poor adhesion, heterogeneity, and presence of fractures compared to the homogeneity and absence of fractures of the coating on stainless steel.

Downloads

Download data is not yet available.

References

(ONU), O. d. (s.f.). El agua, fuente de vida 2005-2015. Recuperado el 14 de 09 de 2016, de http://www.un.org/spanish/waterforlifedecade/quality.shtml

Arango-Parrado, A. (2006). Elaboración de películas de TiO2 por sedimentación para el post-tratamiento de un efluente anaeróbico generado en un relleno sanitario. Superficies y vacío, 22(2), 10-16.

C. de M. da Trindade, S. d. (2018). Synthesis and characterization of TiO2 films onto AISI 304 metallic meshes and their application in the decomposition of the endocrine-disrupting alkylphenolic chemicals. Applied Surface Science, 457, 644-654. doi:10.1016/j.apsusc.2018.06.287.

C.-S. Lee, J. K.-H. (2009). Plasma-Enhanced ALD of TiO2 Thin Films on SUS 304 Stainless Steel for Photocatalytic Application. Journal of The Electrochemical Society, 156(5), D188-D192.

Castrillón García, M. (2012). Síntesis de nanopartículas magnéticas y su aplicación en nanocompuestos de matriz polimérica con propiedades magnéticas. Zaragoza, España: Universidad de Zaragozaa.

Chan, S., Wu, T., Juan, J., & Teh, C. (2011). Recent developments of metal oxide semiconductors as photocatalysts in advanced oxidation processes (AOPs) for treatment of dye waste-water. Journal of Chemical Technology and Biotechnology(86), 1130-1158.

CM. Gómez, G. D.-R.-V.-S. (2016). Alumina coating with TiO2 and its effect on catalytic photodegradation of phenol and p-cresol. Journal of Chemical Technology y Biochemi<, 2211-2221. doi:10.1002/jctb.5025

Falk, G. B.-M. (2017). Microwave-assisted synthesis of Nb2O5 for photocatalytic application of nanopowders and thin films. Journal of Materiales Research, 32(17), 3271-3278.

Ismail, A. A.-S. (2015). Ismail, A. A., Abdelfattah, I., Atitar, M. F., Robben, L., Bouzid, H., Al-Sayari, S. A., & Bahnemann, D. W. (2015). Photocatalytic degradation of imazapyr using mesoporous Al2O3–TiO2 nanocomposites. Separation and Purification Technology, 145, 147–153. do. Separation and purification Technology, 145, 147-153. doi:10.1016/j.seppur.2015.03.012

Jaramillo-Páez, C., & Taborda-Ocampo, G. (2006). La Fotocatálisis: Aspectos Fundamentales para una buena remoción de Contaminantes. Universidad de Caldas, 26(1-2), 71-88.

Jiang W, M. H. (2009). Bacterial toxicity comparison between nano- and micro-scaled oxide particles. Enviromental & Pollution(157), 1619-1625.

Jin T, S. D. (2009). Antimicrobial efficacy of zinc oxide quantum dots against Listeria monocytogenes, Salmonella enteritidis and Escherichia coli O157:H7. Journal of Food and Science, 74, 46-52.

L. Xu, H. S. (2012). Facile synthesis of nano-crystalline alpha-alumina at low temperature via an absolute ethanol sol–gel strategy. Materiala Chemistry and Physics, 132(2-3), 1071-1076. doi:https://doi.org/10.1016/j.matchemphys.2011.12.069

Liu Y, H. L. (2009). Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7. Journal of Applications Microbiological, 107, 1193-1201.

Majid, F. (2013). Synthesis and Characterization of Sol-Gel deposited Aluminum oxide at Low temperatures. World Congress on Advanced in Nano, Biomechanics, Robotics and Energy Research. Seoul, Corea.

Martinez-Gómez, C. R.-V.-C.-R.-L. (2022). Photodegradation and Mineralization of Phenol Using TiO2Coated γ-Al2O3: Effect of Thermic Treatment. Processes, 10(1186), 1-15. doi:10.3390/pr10061186

Mboula, V., Héquet, V., Gru, Y., Colim, R., & Andres, Y. (2012). Assesment of the efficiency of photocatalysis on tetracycline biodegradation. Journal of Hazardous materials(209-210), 355-364. doi:10.1016@j.jhazmat.2012.01.032

Moctezuma, E., Leyva, E., Aguilar, C., Luna, R., & Montalvo, C. (2012). Photocatalytic Degradation of Paracetamol: Intermediates and Total Reaction Mechanism. Journal of Hazardous Materials(243), 130-138. Obtenido de http://dx.doi.org/10.1016/j.jhazmat.2012.10.010

Mohsen Behpour, V. A. (2012). Study of the photocatalytic activity of nanocrystalline S, N-codoped TiO2 thin films and powders under visible and sun light irradiation. Applied Surface Science, 258(17), 6595-6601. doi:10.1016/j.apsusc.2012.03.085

N. Karimi, F. R. (2008). Characterization of the oxides formed at 1000°C on the AISI 304 stainless steel by X-ray diffraction and infrared spectroscopy,. Applied Surface Science, 254(8), 2292-2299. doi:10.1016/j.apsusc.2007.09.018.

N. Switzner, H. Q. (2018). Si-bronze to 304 stainless steel GTA weld fusion zone microstructure and mechanical properties. Materials Science and Engineering: A, 709, 55-64. doi:10.1016/j.msea.2017.09.025

Organización de las Naciones Unidas (ONU) para la Educación, l. C. (s.f.). Programa Mundial de Evaluación de los Recursos Hídricos (WWAP). Recuperado el 14 de 09 de 2016, de http://www.unesco.org/new/es/natural-sciences/environment/water/wwap/facts-and-figures/all-facts-wwdr3/fact-15-water-pollution

Pavas, E. (2002). Fotocatálisis: Una alternativa viable para la eliminación de compuestos orgánicos. Universidad EAFIT, 1(127), 59-64.

Pérez, L. (2008). Degradación Fotoquímica de Contaminantes Emergentes mediante Procesos Solares. Evaluación Analítica. Almería, Almería, España: Tesis para optar al grado de Doctor en Ciencias Químicas.

R.S. Sonawane, B. K. (2004). “Preparation and photo-catalytic activity of Fe–TiO2 thin films prepared by sol–gel dip coating. Materials Chemistry Physics, 85, 52-57. doi:10.1016/j.matchemphys.2003.12.007

Schulenburg, C. (23 de 04 de 2004). Nanotecnología: Innovaciones para el día de mañana. (C. E. Investigación, Ed.) Obtenido de https://cordis.europa.eu/pub/nanotechnology/docs/nano_brochure_es.pdf

Soylua, A., Polat, M., Erdogana, D., & Saya, Z. (2014). TiO2–Al2O3 binary mixed oxide surfaces for photocatalytic. Journal of Applied Surface Science(1), 27281 (1-8). doi:http://dx.doi.org/10.1016/j.apsusc.2014.02.065

Sultan Akhtar, A. M. (2018). Enhancement of anticorrosion property of 304 stainless steel using silane coatings. Applied Surface Science, 440, 1286-1297. doi:10.1016/j.apsusc.2018.01.203.

Tang, W., & An, H. (1995). UV/TiO2 Photocatalytic Oxidation of Commercial Dyes in Aqueous Solutions. Chemosphere, 31(9), 4157-4170.

Templeton, M., & Butler, D. (2011). An Introduction to Wastewater Treatment. (http://www2.aku.edu.tr/~icaga/kitaplar/introduction-to-wastewater-treatment.pdf, Ed.) bookboon.com. doi:ISBN 978-87-7681-843-2

Tian, L. Q. (2014). Preparation of Sn4+-Doped Titanium Dioxide Photocatalytic Films on 304 Stainless Steel by Duplex Treatment. Journal of Materials Engineering and Performance, 23, 1790-1798. doi:10.1007/s11665-014-0919-6

Ullah, R., Sun, H., Ang, H., Tadé, M., & Wang, S. (2012). Visible light photocatalytic degradation of organics on nanoparticles of bi-metallic oxides. Journal of Separation and Purification Technology(89), 98-106.

Valeria, H. (4 de octubre de 2019). Láminas y Aceros. Obtenido de https://blog.laminasyaceros.com/

Vargas-Reus, M., Memarzadeh, K., Huang, J., Ren, G., & Allaker, R. (2012). Antimicrobial Activity of Nanoparticulate Metal Oxides against Peri-implantitis Pathogens. International Journal of Antimicrobial Agents(40), 135–139.

Z.S Sadeq, Z. M. (2019). Low cost, fast and powerful performance interfacial charge transfer nanostructured Al2O3 capturing of light photocatalyst eco-friendly system using hydrothermal method. Material Letters, 254, 120-124. doi:https://doi.org/10.1016/j.matlet.2019.07.050

Zaleska-Medynska, A. K. (2018). Metal oxide-based photocatalysis : fundamentals and prospects for application. Amsterdam, Netherlands: Ghenadii Korotcenkov.

Zapata, A. (2011). Descontaminación de aguas biorrecalcitrantes mediante foto-fenton solar y oxidación biológica a escala industrial. Efecto de las variables del proceso fotocatalítico sobre la eficiencia del tratamiento combinado. Almería, Almería, España: Tesis para obtener el grado de Doctor en Ingeniería Química.

Zhao, D., Chen, C., Wang, Y., Ma, W., Zhao, J., Rajh, T., & Zang, L. (2008). Enhanced Photocatalytic Degradation of Dye Pollutants Ander Visible Irradiation on Al (III)-Modified TiOs: Structure, Interaction and Interfacial Electrón Transfer. Eviromental Science and Technology, 42(1), 308-314. doi:10.1021@es071770e_12

Zhao, D., Chen, C., wang, Y., Ma, W., Zhao, J., Rajh, T., & Zang, L. (2008). Enhanced Photocatalytic Degradation of Dye Pollutants under Visible Irradiation on Al(III)-Modified TiO2: Structure, Interaction, and Interfacial Electron Transfer. Journal of Enviromental Science and Technology, 42(1), 308-314. doi: 10.1021/es071770e

Published
2022-12-12
How to Cite
Camacho-González, M. A., Garrido-Hernández, A., Ruiz-Guerrero, R., & Lozano-Monroy, C. U. (2022). Recubrimientos de Al2O3/TiO2 depositados en sustratos de acero inoxidable y galvanizado para aplicaciones fotocatalíticas. Pädi Boletín Científico De Ciencias Básicas E Ingenierías Del ICBI, 10(Especial7), 189-195. https://doi.org/10.29057/icbi.v10iEspecial7.9990

Most read articles by the same author(s)

<< < 1 2