Design of a mobile aquatic feeder for Oreochromis niloticus
Abstract
Today, tilapia farming is a standardized and well-defined process, however, fish farmers do not have the necessary tools to ensure that the process is being carried out properly in terms of portions, especially when it comes to large ponds, feeding the school of fish in them becomes a task that requires time and effort. In this work, a project proposal was developed to help fish farmers with the design and construction of a prototype aquatic mobile automatic feeder that, as its name says, allows feeding the fish by moving around the pond and with the correct ratio. In addition, the design of a human-machine interface was developed so that the operator could control the prototype, including the ability to decide when to release the feed. This project is intended to help facilitate the fish farmer's task of feeding the school of fish using the mechatronic design methodology.
Downloads
References
Bermudez, G. (2002). Robots móviles. teoría, aplicaciones y experiencias. Tecnura, 5(10):6–17.
Hernández Pizano, D. (2022). Diseño de automatización para dosificación y planeación de rutas para una máquina móvil destinada a la alimentación de tilapia en estanques de cultivo. Tecnológico Nacional De México.
INAPESCA (2021). Carta nacional acuícola.
Kotlyarov, V., Buryakovskiy, S., Artem, K., y Tyshchenko, A. (2022). Verification of the design methodology for configurable electromechanical systems. En 2022 IEEE 3rd KhPI Week on Advanced Technology (KhPIWeek), pp. 1–4.
León Quenguan, J. D. y Rueda Almario, D. (2013). Dispensador automático de comida para mascotas, programable y controlado remotamente [recurso electrónico]. Tesis doctoral. Consultado el 30 de enero del 2023.
Marco Andres Meza Calderon, D. Y. F. Q. (2015). Diseño y construcción de un robot acuático.
Mayné, J. (2005). Estado actual de las comunicaciones inalámbricas. en línea. Consultado el 30 de enero de 2023.
Mott, R. L. y Untener, J. A. (2015). Mecánica de Fluidos. Pearson.
Pacori-Palomino, C., Quispe-Yauri, R., Sanchez-Quispe, D., Uribe-Morales, S., y Huamanchahua, D. (2022). Design of an active orthosis for the rehabilitation of elderly adults with gonarthrosis. En 2022 IEEE 13th Annual Ubiquitous Computing, Electronics and Mobile Communication Conference(UEMCON), pp. 0180–0186.
Rodriguez-Leal, O. V., Arceo-Díaz, S., Bricio-Barrios, E. E., Amezcua- Valdovinos, I., y Sánchez-Granada, B. A. (2021). Propuesta de diseño de un alimentador automatizado para la acuicultura. Difu100ci@, Revista de difusión científica, ingeniería y tecnologías, 15(3):124–131.
Sotelo-De la Cruz, P. P., Soriano-Prado, L. J., Indigoyen-Porras, J. C., Llactahuaman-Rodriguez, I., Ortiz-Zacarias, J. R., Del Carpio-Ramirez, S. I., y Castillo-Velarde, R. C. (2022). Mechatronic design of an intelligent road for accident prevention on the qatac route, aija-peru. En 2022 International Conference on Mechanical, Automation and Electrical Engineering (CMAEE), pp. 133–138.
Suarez-Paz, A. P., Vasquez-Chirito, C. A., Cruz-Cruz, M. X., y Huamanchahua, D. (2022). Proof of concept design of a postural and stabilizing orthosis for elderly people with gonarthrosis. En 2022 IEEE 13th Annual Ubiquitous Computing, Electronics and Mobile Communication Conference (UEMCON), pp. 0244–0250.
Copyright (c) 2024 Santiago Arceo-Díaz, Ramón Jaramillo-Martínez, Sebastián Gallegos-Ojeda, Michelle Anahí Núñez-Núñez, Jessica Ramírez-Mota, Flabio Dario Mirelez Delgado
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
