Implementation in a virtual laboratory of a teleoperated system in master slave configuration with communication based on the TCP/IP protocol
Abstract
This paper presents the development of a teleoperation system between two virtual robots, the designed robots for this system were a PHANToM OMNI device and the PUMA 560 robot. For this, the physical constraints of the robots were considered through their respective kinematic and dynamic models. A platform was made using the Simulink software to simulate the teleoperation of both robots, this allows adding delays to simulate the behavior of the systems with due to protocol comunication problems. Control tests were developed to implement a PID controller and a inverse dynamics control to adjust, with this a comparison can be made in the behavior of the system with the control of the controls of the efects of the delays of the communication network in the tracking of trajectories.
Downloads
References
Armstrong, B., Khatib, O., Burdick, J., 2005. The explicit dynamic model and inertial parameters of the PUMA 560 arm, 510–518. DOI: 10.1109/robot.1986.1087644
Corona, A. E., 2004. Protocolos tcp/ip de internet. Revista Digital Universitaria 5 (8), 1–7.
Correa, A. C., 2006. Sistemas robóticos teleoperados. Ciencia e Ingeniería Neogranadina (15), 62–69.
Craig, J., 2006. Robótica. Pearson Educación.
Cui, F., Zhang, M.-L., Liu, B.-Q., 08 2006. Design of the mending robot based on virtual reality and intelligent decision system, 753–758.
Freund, E., Robmann, J., 07 1997. How to control a multi-robot system by means of projective virtual reality, 759–754.
Jarillo-Silva, A., Domínguez-Ramírez, O. A., Parra-Vega, V., Ordaz-Oliver, J. P., 2009. Phantom omni haptic device: Kinematic and manipulability. CERMA 2009 - Electronics Robotics and Automotive Mechanics Conference, 193–198. DOI: 10.3923/ijbc.2010.190.202
Martin, J., Trivino, G., 01 2006. A study of the manipulability of the phantom omni haptic interface., 127–128. DOI: 10.2312/PE/vriphys/vriphys06/127-128
MathWorks, I., 2004. Virtual Reality Toolbox. The MathWorks Inc.
MathWorks, I., 2007. Instrument Control Toolbox 2: user’s guide. The MathWorks Inc.
N. Rodriguez, J. P. J., 09 2002. A virtual reality tool for teleoperation research, 57–62.
P. I-Hai Lin, . S. W., 1994. Comparison on fuzzy logic and pid controls for a dc motor position controller. DOI: 10.1109/ias.1994.377695
R. Barrera-Gálvez, . J. M. Fernández-Ramírez., O. A. D.-R., 02 2015. Design and integration of a human-robot physical integration platform with purposes of medical diagnosis and rehabilitation of upper limb, 57–62.
Sansanayuth, T., Nilkhamhang, I., Tungpimolrat, K., 01 2012. Teleoperation with inverse dynamics control for phantom omni haptic device. Proceedings of the SICE Annual Conference, 2121–2126.
Solá, S., 2007. Fundamentos de sistemas operativos: teoría y ejercicios resueltos. Thomson.
Song, G., Guo, S., Wang, Q., 2006. A tele-operation system based on haptic feedback, 1127–1131.
Spong, M. W., Hutchinson, S., Vidyasagar, M., 2005. Robot Modeling and Control. Wiley.
Tang, X., Yamada, H., Dingxuan, Z., Tao, N., 08 2009. Haptic interaction in tele-operation control system of construction robot based on virtual reality, 78–83.
Tzafestas, C., Velanas, S., Fakiridis, G., 2008. Adaptive impedance control in haptic teleoperation to improve transparency under time-delay. In: 2008 IEEE International Conference on Robotics and Automation. IEEE, pp. 212–219.
Yamada, H., Tao, N., Dingxuan, Z., 08 2008. Construction tele-robot system with virtual reality, 36–40.
Zainan, J., Hong, L., Jie, W., Jianbin, H., 09 2009. Virtual reality-based teleoperation with robustness against modeling errors, 325–333. DOI: 10.1016/S1000-9361(08)60106-5
Copyright (c) 2019 Mario Alberto Magaña Méndez, Rafael Hernández-Ríos, J. Gerardo Benítez-Morales, Omar A. Domínguez-Ramírez, Julio C. Ramos-Fernández
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.