Obtaining α-Al2O3 from aluminum slag
Abstract
This research work describes the production of alpha alumina (α-Al2O3) using aluminum dross, an industrial toxic waste. The process consists of a leaching stage of the aluminum slag with a 0.5M NaOH solution, followed by a precipitation stage with HCl and, finally, calcination of the recovered solid at a temperature of 1200ºC for 72 hours. Of the product obtained, the existing phases are presented by means of the X-ray diffraction technique (XRD), the morphological exploration through the scanning electron microscopy technique (SEM) and the elemental microanalysis by X-ray energy dispersive spectrometry (EDS). In addition, the liquid resulting from the filtration was analyzed using the inductively coupled plasma (ICP) technique.
Downloads
References
Baudín, C. (2021). Alumina, Structure and Properties. En Encyclopedia of Materials: Technical Ceramics and Glasses. Elsevier.
Canalum. (12 de Febrero de 2020). Cámara Nacional de la Industria del Aluminio México. México.
Ghorab, H., Rizk, M., Matter, A., & Salama, A. (2004). Characterization and Recycling of Aluminum Slag. Plymer-Plastics Technology and Engineerig, 1663-1675. doi:https://doi.org/10.1016/j.resconrec.2017.11.026
Gil, A. (2007). Management of salt cake generated at secondary aluminum melting plants by dysponsal in a controlled landfill: Characteristics of the controlled landfill and a study of environmental impacts. Enviromental Engineering Science, 1234-1244. doi:10.1089/ees.2006.0123
Lamouri, S., Hamidouche, M., Bouaouadja, N., Belhouchet, H., Garnier, V., Fantozzi, G., & Trelkat, J. (2017). Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification. Boletin de la Sociedad Espanola de Ceramica y Vidrio,, 47-54.
Lumley, R. (2011). Fundamentals of aluminium metallurgy. Cambridge: Woodhead Publishing.
Piconi, C. (2011). Alumina. En Comprehensive Biomaterials. Elsevier., 73–94.
Wefers, K. (1983). Properties and characterization of surface oxides on aluminum alloys. En Advances in Materials Characterization.
Xie, Y., Kocaefe, D., Kocaefe, Y., Cheng, J., & Liu , W. (2016). The effect of novel synthetic methods and parameters control on morphology of nano-alumina particles. . Nanoscale Research Letters.