Cinética de Molienda de las Escombreras del Distrito Pachuca-Real del Monte, Estado de Hidalgo, México

Juan Hernández-Ávila; Eduardo  Cerecedo-Saenz; Norman Toro; Alberto Arenas-Flores; Ventura Rodríguez-Lugo; Eleazar Salinas-Rodríguez

doi:10.29057/icbi.v8iEspecial.6292

Juan Hernández-Ávila Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0002-0275-1196
Eduardo Cerecedo-Saenz Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0001-5473-1456
Norman Toro Universidad Arturo Prat
Alberto Arenas-Flores Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0002-2997-4234
Ventura Rodríguez-Lugo Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0001-8767-032X
Eleazar Salinas-Rodríguez Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0002-0510-3266

DOI: https://doi.org/10.29057/icbi.v8iEspecial.6292

Keywords: Grinding, silver, tailings, kinetics

Abstract

In the present study, the grinding kinetics size by size and species by species of the Dos Carlos Tailings of the city of Pachuca, Hidalgo, Mexico were carried out; presenting an average chemical composition in % of 70.43 of SiO2, 7.032 of Al2O3, 2.69 of Fe2O3, 0.70 of Mn, 3.98 of K2O, 3.34 of CaO, 2.50 of Na2O, 1.01 of MgO, 0.26 of TiO2, 0.04 of Zn, 0.026 of Pb, 56 g / ton of Ag and 0.6 g / ton of Au; being appreciated as the majority mineralogical phases: quartz, albite, argentite, berlinite, orthoclase, silver-bearing potassium jarosite, silver-bearing sodium jarosite, feldspar, Anortoclase, Calcite. The experimental results show that as the grinding time increases to values between 32 and 46 minutes, the distribution of the metallic contents is very similar and they are given by the range of 200 to 400 meshes, the maximum specific speed of global grinding (size by size) and by species corresponding to 200 mesh, for sizes smaller than 200 mesh a decrease in the specific speed is generated by species (silver), determining that the optimal grinding time found under these studied conditions was 8 minutes.

Downloads

Download data is not yet available.

References

Austin, L. G. and Bathia, V.K., (1972), “Experimental methods for grinding studies in Laboratory Mills”, Powder Technology 5, 261-266.

Flores Badillo, J., Hernández Ávila, J., Patiño Cardona, F., Pineda, T., Yacelit, N., Santos, O., & Abacú, J. (2014, August). Developing Alternative Building Materials from Mining Waste. In Advanced Materials Research Vol. 976, 202-206. https://www.scientific.net/AMR.976.202

Harris, C. C., (1970) ‘The effect of time on Batch Grinding’, Powder Technology 4, 57-60.

Harris, C. C., (1971), ‘The Alyasdin – Weiball chart in Batch Comminution kinetics’, Trans., Inst. Min. Met. 80, 41-44.

Hernández, A. J., , Salinas. R. E., Patiño. C. F., Rivera, L. I., Reyes. P. M., Perez. L. M., Cerecedo. S. E. (2011), Characterization of Burrows from Mining District of Pachuca–Real Del Monte, in Hidalgo State and Viability Study to Use These Residues as Alternate Industrial Material. In EPD Congress , 73-80. https://onlinelibrary.wiley.com/doi/abs/10.1002/9781118495285.ch9

Hernández, A. J., Patiño. C. F., Rivera, L. I., Salinas. R. E., Alamilla M. M., Cerecedo. S. E., Reyes. P. M., Perez. L. M., (2009), Silver Dissolution From The Waste Mounds Of Pachuca, Hidalgo State, Mexico – Effect Of Cyanide Concentration On Dissolution Rate, (Europan Metallurgical Conference EMC).

Hernández, J., Rivera, I., Patiño, F., & Juárez, J. C. (2013). Estudio Cinético de la Lixiviación de Plata en el Sistema S2O3 (2-)-O2-Cu2+ Contenido en Residuos Minero-Metalúrgicos. Información tecnológica, 24(1), 51-58. https://scielo.conicyt.cl/scielo.php?pid=S0718-07642013000100007&script=sci_arttext&tlng=en

Horst, W. E. and Bassarear, J. E., (1976), ‘Use of Ore Grindability Technique to Evaluate Plant Performance’, Trans. AIME 260, 348-351.

https://link.springer.com/chapter/10.1007/978-94-011-3684-6_3

Patiño F. & Ramírez J., 1991) Grinding of the Jales de Santa Julia de la Compañía Real del Monte y Pachuca, S.A. de C.V. México, EMC’91: Non-ferrous Metallurgy – Present and future, Elsevier Applied Science, London and New York,

https://link.springer.com/chapter/10.1007/978-94-011-3684-6_3

Ramírez, J., (1978), Simulation of proposed grinding circuit change to reduce Pb Sliming, Tesis de Master of Engineering, Department of Mining and Metallurgical Engineering McGill University, Montreal, Canada, 1-160.

Reid, K. J., (1965), “A solution to the Batch Grinding Equation”, Chem. Eng. Sci. (20), 953-963.

Rivera, I., Patiño, F., & Juárez, J. C. (2013). Estudio Cinético de la Lixiviación de Plata en el Sistema S2O3 (2-)-O2-Cu2+ Contenido en Residuos Minero-Metalúrgicos. Información tecnológica, 24(1), 51-58. http://dx.doi.org/10.4067/S0718-07642013000100007

Salinas-Rodriguez, E., Flores-Badillo, J., Hernandez-Avila, J., Cerecedo-Saenz, E., Gutierrez-Amador, M., Jeldres, R. I., & Toro, N. (2020). Assessment of Silica Recovery from Metallurgical Mining Waste, by Means of Column Flotation. Metals, 10(1), 72. 1-12 https://www.mdpi.com/2075-4701/10/1/72

Salinas-Rodríguez, E., Hernández-Ávila, J., Rivera-Landero, I., Cerecedo-Sáenz, E., Reyes-Valderrama, M. I., Correa-Cruz, M., & Rubio-Mihi, D. (2016). Leaching of silver contained in mining tailings, using sodium thiosulfate: A kinetic study. Hydrometallurgy, 160, 6-11. HTTP://WWW.SCIENCEDIRECT.COM/SCIENCE/ARTICLE/PII/S0304386X15301559

Taggart, A. F. (1948). Handbook of mineral dressing. Wiley.

Tanaka, T. and Selby, D. W., (1976) “A Kinetic approach to interference effects in the grinding of binary mixtures”, Proc. Aust. Min. Met. 258, 41-45.

Wiley John & Sons, Inc..CRM. (1992). Monografía Geológico-Minera del Estado de Hidalgo. México: CRM.