Proceso de fundición en molde de arena: diseño, simulación e impresión 3D

Carlos Ernesto Borja Soto; Montiel Hernández Montiel Hernández; David Eduardo Luqueño de la Rosa; Víctor Alonso Jimenez de la Paz

doi:10.29057/escs.v7i14.5555

Sand mold casting process: design, simulation and 3D print

Carlos Ernesto Borja Soto Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0003-3385-8348
Montiel Hernández Montiel Hernández Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0001-6890-6069
David Eduardo Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0001-5413-8089
Víctor Alonso Jimenez de la Paz Universidad Autónoma del Estado de Hidalgo https://orcid.org/0000-0001-5661-6339

DOI: https://doi.org/10.29057/escs.v7i14.5555

Keywords: sand mold, simulation, mechanical properties, solidification, alloys, phase diagram

Abstract

This article contains the results obtained from the simulation of the sand mold casting process for A380 aluminium alloy. The Young's modulus values of the A380 alloy as a function of temperature were also included. The use of computer packages represents advantages in the design of mechanical parts. Finally, the results of 3D printing in obtaining a scale-size model are shown.

Downloads

Download data is not yet available.

References

Smith W. F. Ciencia e ingeniería de los materiales. McGraw-Hill; 2007.

Groover M. Fundamentos de manufactura moderna. McGraw-Hill; 2007.

https://www.dynacast.mx/a380

https://impresiontresde.com/category/investigacion/

PDF (Español (España))

Published

2020-07-05

How to Cite

Borja Soto, C. E., Montiel Hernández, M. H., Luqueño de la Rosa, D. E., & Jimenez de la Paz, V. A. (2020). Sand mold casting process: design, simulation and 3D print. Ingenio Y Conciencia Boletín Científico De La Escuela Superior Ciudad Sahagún, 7(14), 47-51. https://doi.org/10.29057/escs.v7i14.5555