Efecto del tratamiento térmico a baja temperatura para la obtención de películas delgadas de SnO

Palabras clave: óxido de estaño, óxido semiconductor tipo-p, pulverización catódica reactiva, recocido a baja temperatura, electrónica flexible

Resumen

Por sus ventajas, el SnO es un óxido semiconductor (OMS) usado en transistores de película delgada (TFTs) de canal-p y considerado para aplicaciones flexibles y transparentes. Aunque se deposita por varias técnicas, suele aplicarse un recocido >200 °C para obtenerlo, que es incompatible con la fabricación de TFTs con OMS tipo-n y con sustratos flexibles y transparentes. Aquí mostramos el efecto de la presión parcial de oxígeno (OPP) y del recocido ≤200 °C en las propiedades estructurales, ópticas, composicionales y eléctricas de las capas depositadas por pulverización catódica. Una OPP al 9% y un recocido entre 190 y 200 °C indujeron una mezcla de fases entre el estaño metálico y el SnO con orientación hacia diferentes planos, una transmitancia hasta de 36% en el espectro UV/Vis, un ancho de banda óptico de ~2.83 eV y una resistividad de 1 mΩ×cm. Esto coincide con los datos reportados del SnO tipo-p, lo que también posibilita su compatibilidad con la fabricación de TFTs con OMS tipo-n.

Descargas

La descarga de datos todavía no está disponible.

Citas

Allen, J. P., et al., (2013). Understanding the defect chemistry of tin monoxide. Journal of Materials Chemistry C 1, 48, 8194–8208. DOI: 10.1039/C3TC31863J

Baco, S., et al., (2012). Study on Optical Properties of Tin Oxide Thin Film at Different Annealing Temperature. Journal of Science and Technology 40, 1, 61–72.

Banerjee, A. N., Chattopadhyay, K. K., (2005). Recent developments in the emerging field of crystalline p-type transparent conducting oxide thin films. Progress in Crystal Growth and Characterization of Materials 50, 1–3, 52–105. DOI: 10.1016/j.pcrysgrow.2005.10.001

Batzill, M., Diebold, U., (2005). The surface and materials science of tin oxide. Progress in Surface Science 79, 2–4, 47–154. DOI: 10.1016/j.progsurf.2005.09.002

Caraveo, J. A., et al., (2013). Record mobility in transparent p-type tin monoxide films and devices by phase engineering. ACS Nano 7, 6, 5160–5167. DOI: 10.1021/nn400852r

De Barros, A. R. X., (2014). Development of p-type oxide semiconductors based on tin oxide and its alloys: application to thin film transistors. Ph.D. dissertation, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal.

Fortunato, E., et al., (2010). Transparent p-type SnOx thin film transistors produced by reactive rf magnetron sputtering followed by low temperature annealing. Applied Physic Letters 97, 5, 1–4. DOI: 10.1063/1.3469939

Fortunato, E., et al., (2012). Oxide semiconductor thin-film transistors: A review of recent advances. Advanced Materials 24, 22, 2945–2986. DOI: 10.1002/adma.201103228

Golovashkin, A. I., Motulevich, G. P., (1965). Optical properties of Tin at helium temperatures. Sovietic Physics JETP 20, 1, 46–49.

Guzman, D., et al., (2018). Fully patterned p-channel SnO TFTs using transparent Al2O3 gate insulator and ITO as source and drain contacts. Semiconductor Science and Technology 33, 3, 1–8. DOI: 10.1088/1361-6641/aaa7a6

Guzman, D., et al., (2018). Optical properties of p-type SnOx thin films deposited by DC reactive sputtering. Journal of Materials Science: Materials in Electronics 30, 1366–1373. DOI: 10.1007/s10854-018-0406-1

Li, Y., et al., (2018). Ambipolar SnOx thin-film transistor achieved at high sputtering power. Applied Physics Letters 112, 18, 1–4. DOI: 10.1063/1.5022875

Liang, L. Y., et al., (2010). Phase and Optical Characterizations of Annealed SnO Thin Films and Their p-Type TFT Application service Phase and Optical Characterizations of Annealed SnO Thin Films and Their p-Type TFT Application. Journal of Electrochemical Society 157, 6, 598–603. DOI: 10.1149/1.3385390

Liu, Q., et al., (2015). Tunable crystallographic grain orientation and Raman fingerprints of polycrystalline SnO thin films. Journal of Materials Chemistry C 3, 5, 1077–1081. DOI: 10.1039/C4TC02184C

Lorenz, M., et al., (2016). The 2016 oxide electronic materials and oxide interfaces roadmap. Jornal of Physics D: Applied Physics 49, 43, 1–53. DOI: 10.1088/0022-3727/49/43/433001

Luo, H., et al., (2012). Structural, Chemical, Optical, and Electrical Evolution of SnOx Films Deposited by Reactive rf Magnetron Sputtering. ACS Applied Materials and Interfaces 4, 5673–5677. DOI: 10.1021/am301601s

Meyer, M., (2001). Ab initio pseudopotential calculation of the equilibrium structure of tin monoxide. Physical Review B 64, 4, 1–9. DOI: 10.1103/PhysRevB.64.045119

Nomura, K., et al., (2004). Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors. Nature 432, 7016, 488–492. DOI: 10.1038/nature03090

Nomura, K., et al., (2011). Ambipolar Oxide Thin-Film Transistor. Advanced Materials 23, 30, 3431–3434. DOI: 10.1002/adma.201101410

Pan, X. Q., Fu, L., (2001). Tin oxide thin films grown on the (1012) sapphire substrate. Journal of Electroceramics 7, 35–46. DOI: 10.1023/A:1012270927642

Park, J. W., et al., (2019). A Review of Low-Temperature Solution-Processed Metal Oxide Thin-Film Transistors for Flexible Electronics. Advanced Functional Materials 30, 20, 1–40. DOI: 10.1002/adfm.201904632

Shan, F., et al., (2016). High-mobility p-type NiOx thin-film transistors processed at low temperatures with Al2O3 high-k dielectric. Journal of Material Chemistry C 40, 9438–9444. DOI: 10.1039/C6TC02137A

Tauc, J., Menth, A., (1972). States in the Gap. Journal of Non-Cristalline Solids 8–10, 569–585. DOI: 10.1016/0022-3093(72)90194-9

Wang, Z., et al., (2016). Recent Developments in p-Type Oxide Semiconductor Materials and Devices. Advanced Materials 28, 20, 3831–3892. DOI: 10.1002/adma.201503080

Wu, M.-H., et al., (2019). Submicrometer p-Type SnO Thin-Film Transistors Fabricated by Film Profile Engineering Method. IEEE Transactions on Electron Devices 66, 4, 1766–1771. DOI: 10.1109/TED.2019.2897813

Yang, T., et al., (2015). Preparation and characterization of p-type transparent conducting SnO thin films. Materials Letters 139, 39–41. DOI: 10.1016/j.matlet.2014.10.040

Zhong, C.-W., et al., (2016). Impact of thermal oxygen annealing on the properties of tin oxide films and characteristics of p-type thin-film transistors. Japanese Journal of Applied Physics 55, 1–5. DOI: 10.7567/JJAP.55.016501

Publicado
2021-12-12
Cómo citar
Garduño, S. I., Martínez-Arreola, S., Hernández-Como, N., Rodríguez-Lugo, V., & Estrada, M. (2021). Efecto del tratamiento térmico a baja temperatura para la obtención de películas delgadas de SnO. Pädi Boletín Científico De Ciencias Básicas E Ingenierías Del ICBI, 9(Especial2), 110-118. https://doi.org/10.29057/icbi.v9iEspecial2.7785

Artículos más leídos del mismo autor/a

<< < 1 2 3 > >>